Precision-turbo-and-engine BigStuff3 GEN3 PRO SEFI (LS1) System Hardware & Manuel d'utilisateur télécharger pdf (Page 87)

BigStuff3 Pro SEFI System (LS1)

Version 1.0 86

58. Individual Cylinder - Spark

The fixed inputs in the table below represent the firing order configured during the firing order

configuration process (Firing_Order_Config). The input cells allow the user to define the

amount of timing advance or retard (up to 10

) for or each cylinder in the table. Timing

corrections are made to the values in the Spark Table.

Note: The GEN3 LS1 system, with the Coil-on-Plug (COP) ignition system, is the only GEN3

system with bi-directional timing compensation.

59. Individual Cylinder - Fuel

The fixed inputs in the table below represent the firing order configured during the firing order

configuration process (Firing_Order_Config). The input cells allow the user to define the

percent of fuel to be increased or decreased (up to 25%) for or each cylinder in the table. The

individual fuel correction values modify the base pulse width in the Fuel Table.

To change a value in these tables, move the cursor using the PC’s mouse or arrow keys to the

cell to be changed. Input the desired value and hit “Enter” to save the change.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 121 122

Pas de commentaire

Precision-turbo-and-engine BigStuff3 GEN3 PRO SEFI (LS1) System Hardware & Manuel d'utilisateur Page 87